4 Ounce Armorers Hammer for AR15 / M16 Armorers Kit
Part Number: WRENCH1-16
1/16th inch Allen Wrench for AR15 / M16 Armorers Kit
This Allen Wrench is the size you need to adjust the index screw on an A2 or Carry Handle Rear Sight. Tool steel - made in the USA.
Part Number: WRENCH3-16T
3/16th inch Allen Wrench for AR15 / M16 Armorers Kit
AR15 / M16 Armorers know that the AR pistol grip screw can be difficult to reach. This is the tool we use - and recommend. This 3/16th size Allen Wrench with a comfortable red vinyl dipped cushion handle will provide years of service, and plenty of length to reach into that pistol grip. Made in USA.
Part Number: 556-FIELD
5.56mm NATO Caliber Headspace FIELD Gauge for AR15 / M16 Armorers Kit
This high quality machined steel gauge determines overly excessive headspace in the barrel’s firing chamber. This can indicate firing chamber or bolt wear. If a rifle’s bolt closes on a FIELD gauge, that means that the chamber is oversized and the rifle should not be fired. The barrel should be replaced. The Gauge is etched with caliber marking,...
Part Number: 556-GO
5.56mm NATO Caliber Headspace GO Gauge for AR15 / M16 Armorers Kit
This high quality machined steel gauge measures headspace in the barrel’s firing chamber. It is also used to indicate proper chamber depth or an oversized bolt. Etched with caliber marking and "GO” designation. Machined to SAAMI specification, and made in USA.
Part Number: 556-NOGO
5.56mm NATO Caliber Headspace NO-GO Gauge for AR15 / M16 Armorers Kit
This high quality machined steel gauge determines excessive headspace in the barrel’s firing chamber, as well as too much chamber depth, or an undersized bolt. A bolt that closes on a No-Go gauge means that a chamber is close to the maximum chamber size. Etched with caliber marking, and "NO GO” designation. Machined to SAAMI specifications, and ...
Part Number: BLOCK-BENCH
Bench Block for AR15 / M16 Armorers Kit
Machined from a solid block of nylon, this durable bench block will facilitate AR15/M16 front sight removal - providing a solid support for taper pin removal/installation Also works with rail gas blocks. Additionally, there is a "shelf” machined into one end with a hole in it that will support the "ear” of an AR15/M16 lower receiver when install...
Part Number: CARBONSCRAPER
Bolt & Carrier Carbon Scraper / MultiTool for AR15/M16
Here’s the handiest little AR Bolt & Carrier care tool you can keep in your range bag. The Combat Application Tools C.A.T. M-4 Tool allows the operator to clean the weapon and restore the bolt and carrier group to tactical tolerance in a matter of minutes - in the field, with gloved hands, and in low light conditions if necessary. This tool ...
Part Number: WRENCH-COMBO
Combination Wrench for AR15 / M16 Armorers Kit
An essential tool for the AR15 or M16 armorer or shooter who prefers to perform their own repairs or build their own weapon. This heavy duty tool removes barrel nuts, extension tubes, castle nuts, and flash suppressors. 1/2” square drive accepts torque wrench or breaker bar heads for the tough jobs. Also removes older style non-collapsible stock...
Part Number: KIT-PUNCHSET
Drift Punch Set for AR15 / M16 Armorers Kit
All the drift Punches you need for work on the AR15/M16 platform rifle, this quality set of Starret punches includes 1/16th; 3/32nd; 1/8th”and 5/32nd” sizes for driving out spring pins, hammer & trigger pins, and a number of other AR tasks. Machined from tool steel with a knurled gripping surface and etched size markings. Made in the USA. Se...
Handguard Removal Tool for AR15 / M16
How to Use
Part Number: SDRIVER5-16
Heavy Duty Armorers Screwdriver for AR15 / M16 Armorers Kit
This sturdy 5/16th” flat bladed screwdriver is perfectly sized for a number of AR15/M16 Armorer’s chores - specifically the top screw on an A2 solid buttstock - but it’s ergonomically designed tri-lobe handle provides maximum tip torque, and its rugged construction will suggest many more uses. Features a durable bi-material handle with comfort g...
Part Number: TOOLBOX
Heavy Duty Toolbox for AR15 / M16 Armorers Kit
Perfect for keeping your armorers or other shooting gear and ammo dry, this Plano Dry Seal Case features a water-resistant O-ring seal to keep the water out. The top access storage and an additional lid compartment provide excellent capacity and organization, while a comfortable molded handle makes transport easy and convenient. Extremely durabl...