Windham Weaponry Realtree Camo Hat
Lower Receivers Parts
Part Number: AMBI-MAG-CATCH-AU
Arms Unlimited Ambidextrous Magazine Catch for AR-15 / M16
Both right and left hand shooters can get faster, easier reloads while keeping the rifle on target. This distinctive design that is the same size and configuration as the factory part; won't snag, resists accidental release and does not interfere with rifle function but allows you to activate the magazine release with the thumb of the non-firing...
7.62 x 39mm Barrels & Parts
Part Number: KIT-BA16M4-762X39
Barrel Assembly for 7.62x39 with A2 Front Sight
This M4 profile Barrel Kit for 7.62x39mm caliber is 16” in length, and includes the Barrel Extension (with M4 Feed Ramps), Barrel Nut, Front Handguard Cap, A2 Standard Sight Base with Sling Swivel, Front Sight Post , Front Sight Detent, and Bayonet Lug. A Bolt specifically designed for 7.62 caliber is included - it is marked with 3 rings just be...
7.62 x 39mm Barrels & Parts
Part Number: KIT-BA16M4B-762X39
Complete Barrel Kit for 7.62x39 with A2 Front Sight
This Kit for 7.62x39mm caliber includes all parts forward of the Upper Receiver as well as a 7.62 specific Bolt and Firing Pin. The M4 profile Barrel is 16” in length, and includes the Barrel Extension (with M4 Feed Ramps), Barrel Nut, Front Handguard Cap, A2 Standard Sight Base with Sling Swivel, Front Sight Post , Front Sight Detent, and Bayon...
.300 Blackout Caliber
Part Number: DH-TBRAKE
Diamondhead T-Brake for .30 Cal AR Platform Rifles
The Diamondhead USA T-Brake for .30 caliber rifles (300 Blackout, 7.62x39, .308) features a unique shape and styling. Beyond good looks and style, the T-Brake's proprietary triangular shape significantly reduces muzzle rise and felt recoil. The shape creates a greater surface on the bottom of the Compensator to apply downward pressure. Heavy 414...
Part Number: 8448592-ELF-308
Elftmann Drop-In Single Stage Match Trigger for .308/AR10 Rifles
The ELF Drop-In AR-10 Trigger has been built to withstand the punishment of high powered calibers. Its the only AR trigger using aircraft needle bearings for an incredibly smooth and fast trigger pull. The heavy hammer combined with .043 double double wound polished piano wire hammer spring ensures full ignition of any ammo including .308 and 7....
Barrels / Parts
Part Number: KIT-SFS-BLOCK
Low Profile Gas Block with Set Screws for AR-15 / M16
This variation of our quality machined steel Gas Block is lightweight, strong and small enough to use with almost any handguard. They mount using two set screws on the bottom. If your barrel does not have the slots from taper pins, some gunsmithing may be needed to ensure a secure attachment to the barrel. We recommend using Red 262 Loctite on t...
Luth-AR Stock for AR15 / M16
The fully adjustable Luth MBA-1 Carbine Buttstock mounts to a rifle with a standard A2 commercial buffer tube and offers an additional 1in cheek rest height; and an additional 1 1/16in length of pull with the extended buttplate. The cheek piece not only moves up and down, it also moves back and forth on the stock. It is fully ambidextrous and ca...
Magpul M-Lok BiPod Mount for AR15/M16
The Magpul M-LOK Bipod Mount allows for the attachment of Harris®-style stud mounted bipods to M-LOK compatible hand guards and forends. This Mount offers a low-profile, robust, and elegant mounting solution for the most common bipods on the market. By utilizing the direct-connect properties of the M-LOK system, the bipod sits closer to the moun...
.308 Magazines & Parts
Part Number: 8448670-25-PMAG-308
Magpul PMAG 25 Round .308 Magazine
The 7.62x51 NATO (.308 Winchester) PMAG 25 LR/SR GEN M3 Window is a lightweight, cost effective, high reliability magazine for SR25/M110 pattern rifles featuring true 25-round capacity, constant-curve body, anti-tilt follower, snap on Impact/Dust Cover. It features next-generation impact and crush resistant polymer construction and transparent w...
Part Number: SBM4-01-B
SB Tactical Pistol Arm Brace for AR Platform Pistols
The SBM4 Pistol Stabilizing Brace® is thin, light and offers enhanced cheek weld ergonomics. It provides stability, accuracy and usability to any AR platform pistol, and is designed so the user can position his/her arm into the flexible rubber brace and strap it snugly with either of two sizes of Velcro bands for one handed pistol shooting. Incl...
Part Number: FL-PROTAC1
StreamLight ProTac 1 350 Lumen Weapon Mounted Light
The StreamLight ProTac® Rail Mount 1 is a fixed-mount, dual fuel long gun light with a light output of 350 lumens (with CR123A battery power). It is machined from 6000 Series aircraft aluminum with anodized finish. The impact resistant Borofloat® glass lens is high temperature, shock mounted and AR coated. The light source offers C4® LED technol...
Part Number: FL-PROTAC2
StreamLight ProTac 2 500 Lumen Weapon Mounted Light
The StreamLight ProTac® Rail Mount 2 is a fixed-mount, dual fuel long gun light with a maximum light output of 625 lumens and a range of 625 meters. It is machined from durable anodized aluminum with an impact-resistant tempered glass lens. The impact resistant Borofloat® glass lens is high temperature, shock mounted and AR coated. The light sou...