Free Ground Shipping On Orders Over 49.99

-Fall Promotion

-Fall Promotion

Sort by:
Sale
Mission First Tactical Two-Piece Handguard Set
Mission First Tactical Two-Piece Handguard Set

Handguards & Grips

Part Number: HGD-MFT-CAR-2PC

$106.20 $124.95
Mission First Tactical Two-Piece Handguard Set

Mission First Tactical Two-Piece Handguard Set

$106.20

This all aluminum AR-15 Carbine Integrated Rail Forend System replaces the plastic factory handguard set in minutes and requires no gunsmithing. No permanent alterations need to be made to the rifle - its a drop in, screwless installation held in place by the Delta Ring and Handguard Cap. Four MIL-STD 1913 Picatinny Rails provide a secure platfo...


More Info
Sale
A1/A2 Sight Adjustment Tool for AR15 / M16
A1/A2 Sight Adjustment Tool for AR15 / M16

Upper Receiver Parts

Part Number: SIGHTTOOL-A1-A2

$5.90 $6.95
A1/A2 Sight Adjustment Tool for AR15 / M16

A1/A2 Sight Adjustment Tool for AR15 / M16

$5.90

This compact tool is essential in your AR15 field kit or range bag. It will adjust the height of both "5 notch” A1 and "4 notch” A2 Front Sight Posts - even the flip-up sights with taller "ears” on either side of the sight post. Machined from high quality steel with a manganese phosphate finish. The central knurled grip has identifying grooves m...


More Info
Sale
Dead On Arms Pinless Trigger Guard for AR15 / M16
Dead On Arms Pinless Trigger Guard for AR15 / M16

Lower Receivers Parts

Part Number: 8448587-DOA

$18.25 $21.50
Dead On Arms Pinless Trigger Guard for AR15 / M16

Dead On Arms Pinless Trigger Guard for AR15 / M16

$18.25

This replacement, oversize trigger guard for the AR15 / M16 eliminates the need for driving pins into the lowers receiver to install trigger guard, and possibly damaging it. Internal, spring loaded detents allow quick, snap in installation, and the oversized guard allows greater clearance for finger - especially when gloved. Machined from type 3...


More Info
Sale
Black Web Sling for AR15 / M16
Black Web Sling for AR15 / M16

Accessories

Part Number: 12624561

$4.20 $4.95
Black Web Sling for AR15 / M16

Black Web Sling for AR15 / M16

$4.20

The same quality sling we include with every gun we sell is offered here as a spare, or you can add it to any of your rifles that might need a sling. Heavy, 1 1/4" width black nylon webbing with two black phosphate finished steel buckles - length 52".


More Info
Sale
Magnetic Gun Cleaning Mat
Magnetic Gun Cleaning Mat

Cleaning Supplies & Tools

Part Number: CLEANINGMAT

$21.55 $23.95
Magnetic Gun Cleaning Mat

Magnetic Gun Cleaning Mat

$21.55

Our gunsmith discovered this great workbench mat for the armorer or AR Carbine owner and he’s been using one ever since. From Armor Industrial Products, this Windham Weaponry customized Work-Shield Gun Mat is made from heavy black material in 54” x 16” dimensions. It incorporates two strips of magnetic material that hold springs, detents and sma...


More Info
Sale
Midwest Industries Two-Piece Mid-Length .308 Handguard for AR10 platform rifles
Midwest Industries Two-Piece Mid-Length .308 Handguard for AR10 platform rifles

.308 Hanguards & Parts

Part Number: HGD-MI-2PC-308

$148.50 $165.00
Midwest Industries Two-Piece Mid-Length .308 Handguard for AR10 platform rifles

Midwest Industries Two-Piece Mid-Length .308 Handguard for AR10 platform rifles

$148.50

These two piece AR10 platform mid length handguards provide for mounting of tactical accessories such as vertical grips, laser sights, LAMs, flashlights, sling mounts, bipods, and optics on .308 rifles (will be too high above the Upper Rec. rail for .223 AR15/M16 rifles). CNC machined from 6061 aircraft grade lightweight aluminum and hard coat a...


More Info
Sale
MidWest Industries 4inch Handguard Rail for AR15/M16
MidWest Industries 4inch Handguard Rail for AR15/M16

Handguards & Grips

Part Number: HGD-MI-RAIL-4

$16.95 $19.95
MidWest Industries 4inch Handguard Rail for AR15/M16

MidWest Industries 4inch Handguard Rail for AR15/M16

$16.95

The Midwest Industries AR15 4" Handguard Rail mounts a Picatinny Rail Segment to your standard AR handguard offering the option to mount various accessories, lights, grips, etc. Will fit AR series handguards with large or small holes. This rail is machined from hard coat black anodized 6061 aluminum. In most cases you will be able to use standar...


More Info
Sale
Complete 6 Position Telestock Kit for AR15 / M16
Complete 6 Position Telestock Kit for AR15 / M16

Buttstocks / Parts

Part Number: KIT-TELESTK

$63.70 $74.95
Complete 6 Position Telestock Kit for AR15 / M16

Complete 6 Position Telestock Kit for AR15 / M16

$63.70

This kit contain all the parts necessary to install a "Tele" on your rifle. The high quality stock features a molded-in Windham Weaponry logo and a completely assembled locking latch. Includes the 6 position receiver extension, the locking nut and positioning plate, rear sling loop, a high quality Action Spring, and a CAR Buffer with aluminum bo...


More Info
Sale
Mission First React Short Foregrip for AR15 / M16
Mission First React Short Foregrip for AR15 / M16

Handguards & Grips

Part Number: VGRIP-MFT-SHORT

$21.20 $24.95
Mission First React Short Foregrip for AR15 / M16

Mission First React Short Foregrip for AR15 / M16

$21.20

The Mission First React Short Foregrip fits any AR15 / M16 Picatinny Accessory Rail to offer a secure non-slip grip - helps stabilize your rifle in rapid fire and offers faster target acquisition. It features a secure, water tight, plugged battery or small part storage compartment and its customizable foam storage block with quick access tab dim...


More Info
Sale
ERGO SureGrip for AR15 / M16
ERGO SureGrip for AR15 / M16

Handguards & Grips

Part Number: 9349127-ERGO-AMBI

$22.90 $26.95
ERGO SureGrip for AR15 / M16

ERGO SureGrip for AR15 / M16

$22.90

This comfortable, ambidextrous, ergonomically designed replacement grip for the AR15/M16 features smooth finger groves, an upper rear extension that supports the web of your hand, and a superior textured finish that minimizes slip with either bare or gloved hands. The Suregrip has an overmolded rubber surface to offer a grip with a little "give”...


More Info
Sale
Skeleton Stock Kit for AR15 / M16
Skeleton Stock Kit for AR15 / M16

Buttstocks / Parts

Part Number: STK-SKELKIT

$101.95 $119.95
Skeleton Stock Kit for AR15 / M16

Skeleton Stock Kit for AR15 / M16

$101.95

Comfortable and lightweight, this rifle length stock kit will replace your telestock or standard stock and includes all necessary parts from the receiver back. A neoprene sleeve offers a great cheekweld for lefty or righty, and the sling swivel can be mounted forward ambidextrously or at the bottom of the buttplate frame. A molded rubber buttpla...


More Info
Sale
Richard E. Dyke: Just a Man from Wilton, Maine
Richard E. Dyke: Just a Man from Wilton, Maine

Publications

Part Number: BOOK-RDYKE

$8.45 $9.95
Richard E. Dyke: Just a Man from Wilton, Maine

Richard E. Dyke: Just a Man from Wilton, Maine

$8.45

This is the story of Richard E. Dyke, founder of Bushmaster Firearms and Windham Weaponry. He has published a book that talks about his life and business adventures. You can get a glimpse into what is behind Dick’s spirit, and drive that brought him and his companies such great success and achievement. All of the profits from this book go to the...


More Info
Sale
A2 Government Profile 20in Crowned Barrel Sub-Assembly for AR15 / M16
A2 Government Profile 20in Crowned Barrel Sub-Assembly for AR15 / M16

Barrels / Parts

Part Number: BA20GVT-CRN-7

$172.00 $215.00
A2 Government Profile 20in Crowned Barrel Sub-Assembly for AR15 / M16

A2 Government Profile 20in Crowned Barrel Sub-Assembly for AR15 / M16

$172.00

This barrel is in the style of the original A2 government profile 20” barrel except that the muzzle is turned with a competition crown. Perfect as a replacement barrel for your target or hunting rifle, it is legal for use in New York State. Barrel material is 4150 Chrome Moly Vanadium 11595E Steel, Chrome Lined in both Bore and Chamber for long ...


More Info
Sale
FIREClean Cleaner / Lubricant / Protectant
FIREClean Cleaner / Lubricant / Protectant

Gunsmithing Tools

Part Number: CLEANER-FIRECLEAN

$11.95 $14.95
FIREClean Cleaner / Lubricant / Protectant

FIREClean Cleaner / Lubricant / Protectant

$11.95

FIREClean Cleaner / Lubricant / Protectant Conditions metal surfaces to minimize carbon fouling, and reduces friction with long-lasting, superior lubrication. Any carbon fouling wipes off easily, and speeds gun cleaning chores. This product is long lasting, has low odor, is biodegradable and non-toxic. 2 fl. oz. in a flip-top plastic bottle. Mad...


More Info
Sale
United States of America Flag
United States of America Flag

Accessories

Part Number: FLAG-USA

$24.00 $30.00
United States of America Flag

United States of America Flag

$24.00

The glorious symbol of our wonderful country - manufactured right in our own fine State of Maine - we offer this 5’ wide x 3’ high all nylon construction United States Flag. Appropriate for use on 15’ to 20’ flag poles or for mounting on building sides, it features strongly hemmed edges, embroidered stars and brass rope grommets. Let your patrio...


More Info
Sale
Windham Weaponry “Bug-Out Bag” Backpack for MCS
Windham Weaponry “Bug-Out Bag” Backpack for MCS

Accessories

Part Number: BOB-BPACK

$202.45 $224.95
Windham Weaponry “Bug-Out Bag” Backpack for MCS

Windham Weaponry “Bug-Out Bag” Backpack for MCS

$202.45

Windham Weaponry’s MCS Multi-Caliber "Bug-Out Bag" System is packed into a high quality back pack that we offer for any number of camping and travel uses. This fine compartmented backpack includes a generously sized zippered pouch on the outermost back, then two zippered, full size layers. The largest compartment is shown open in the 2nd photo (...


More Info